Topic: Da Vinci Mini Error 0031
Does anyone know how to fix error code 0031 on da Vinci Mini W?
You are not logged in. Please login or register.
SoliForum - 3D Printing Community → XYZ Printing Help/Repair/Maintenance → Da Vinci Mini Error 0031
Does anyone know how to fix error code 0031 on da Vinci Mini W?
Check that the Y-axis motor is connected, then check that the Y-axis sensor is in the right position and the connector is plugged in.
This is usually caused by wire harness issue, either plug for y-axis motor/Y-axis endstop is loose or broken wire.
Check the wire for y-axis motor/Y-axis endstop with multimeter if possible.
Switch with x-axis motor/Y-axis endstop wire if you don't have multimeter. If it is the wire, your error code will change to 0030.
SoliForum - 3D Printing Community → XYZ Printing Help/Repair/Maintenance → Da Vinci Mini Error 0031
Powered by PunBB, supported by Informer Technologies, Inc.