Re: NTAG Edit Tool - [DaVinci Junior & Mini]
Bozotclown1970 wrote:
Yes, but still very expensive.
expensive ?? only tags ?? expensive is arduino emutag and so on
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
Not everybody uses up two spools a day :-)
28 2018-02-18 22:18:05 (edited by carl_m1968 2018-02-18 22:19:07)
- carl_m1968
- Member
- Offline
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
madman907 wrote:
Not everybody uses up two spools a day :-)
Is it possible to use two spools a day? I guess if you ran more than one machine. I often do prints that run 8+ hours and barely use 1/4 of a spool.
I would think a tag emulator would be the most economical since all you have to do is reprogram it when you install a new spool. You never have to buy tags and you just reuse the emulator on the same machine for ever.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
29 2018-02-19 06:04:18 (edited by madman907 2018-02-19 09:18:02)
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
What I was trying to say: it may not be feasible for the casual newbie user to get into soldering a DIY emutag solution or buying these modules just to get started with their printer without buying overpriced genuine spools. As you may have witnessed, there are lots of newbies around here (including me) which only print for fun here and there and cant get into details quickly, thats why ive created the two click app.
I meant no offence, every solution featured here has its place and use, but not necesarily for the guy that got its printer yesterday for birthday and is crying for help in these threads.
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
Hello,
Im using a Da Vinci Nano which just updated its firmware to Version 1.1.1.
I've generated dag data using the NTAG Edit Tool v1.30. In the tool I selected the desired material (PLA) and color (white). Then I saved the data to a file:
page 00: 04E4432B
page 01: 2ADA6180
page 02: 11480000
page 03: E1101200
page 04: 0103A00C
page 05: 340300FE
page 06: 00000000
page 07: 00000000
page 08: 5A515700
page 09: 00324353
page 10: E0930400
page 11: E0930400
page 12: D2002D00
page 13: 54484742
page 14: 58464647
page 15: 00000000
page 16: 00000000
page 17: 34000000
page 18: 00000000
page 19: 00000000
page 20: 4A880400
page 21: 029A3654
page 22: 5A34EECE
page 23: 5C7A4D76
page 24: 00000000
page 25: 00000000
page 26: 00000000
page 27: 00000000
page 28: 00000000
page 29: 00000000
page 30: 00000000
page 31: 00000000
page 32: 00000000
page 33: 00000000
page 34: 00000000
page 35: 00000000
page 36: 00000000
page 37: 00000000
page 38: 00000000
page 39: 00000000
page 40: 000000BD
page 41: 070000FF
page 42: 80050000
page 43: 5B8B77F6
page 44: 176B0000
Looking at the data the following points out:
- page 2: no hardware locking enabled
- page 41: authentication disabled
Is there a reasing why the tool doesn't enable authentication?
Then I programmed this data to a new NTAG213 tag using the Arduino and a simple sketch.
The printer ran nicely with this tag. After a few prints I read the tag data and compared it to the original file:
NTAG Edit Tool - NTAG data after use
page 00: 04E4432B - 04E4432B - OK: UID 0
page 01: 2ADA6180 - 2ADA6180 - OK: UID 1
page 02: 11480000 - 1148C6F7 - mismatch: checksum + lock bytes
irreversibly locked pages:6 7 8 9 14 15
page 03: E1101200 - E1101200 - OK: compatibility container
page 04: 0103A00C - 87E3AD32 - mismatch: ???
page 05: 340300FE - C3B812C6 - mismatch: ???
page 06: 00000000 - B847D86E - mismatch: ???
page 07: 00000000 - 2FA12498 - mismatch: ???
page 08: 5A515700 - 5A515759 - mismatch: material + temparature
page 09: 00324353 - 28324353 - mismatch: serial number
page 10: E0930400 - E0930400 - mismatch: initial capacity
page 11: E0930400 - 4A880400 - mismatch: initial capacity
page 12: D2002D00 - 88BE16E6 - mismatch: ???
page 13: 54484742 - 54484742 - OK: serial number
page 14: 58464647 - 58464647 - OK: serial number
page 15: 00000000 - 288004E4 - mismatch: ???
page 16: 00000000 - 432ADA61 - mismatch: ???
page 17: 34000000 - 80000000 - mismatch: ???
page 18: 00000000 - 00000000 - OK
page 19: 00000000 - 00000000 - OK
page 20: 4A880400 - 66860400 - mismatch: remaining length
page 21: 029A3654 - 2E943654 - mismatch: hash
page 22: 5A34EECE - 7E0AEECE - mismatch: hash
page 23: 5C7A4D76 - 78784D76 - mismatch: hash
page 24: 00000000 - 00000000 - OK
page 25: 00000000 - 00000000 - OK
page 26: 00000000 - 00000000 - OK
page 27: 00000000 - 00000000 - OK
page 28: 00000000 - 00000000 - OK
page 29: 00000000 - 00000000 - OK
page 30: 00000000 - 00000000 - OK
page 31: 00000000 - 00000000 - OK
page 32: 00000000 - 00000000 - OK
page 33: 00000000 - 00000000 - OK
page 34: 00000000 - 00000000 - OK
page 35: 00000000 - 00000000 - OK
page 36: 00000000 - 00000000 - OK
page 37: 00000000 - 00000000 - OK
page 38: 00000000 - 00000000 - OK
page 39: 00000000 - 00000000 - OK
page 40: 000000BD - 000000BD - OK: dynamic lock bytes OK
page 41: 070000FF - 070000FF - OK: configuration byte, authentication disabled
page 42: 80050000 - 80050000 - OK: configuration byte: read and write protected by password
page 43: 5B8B77F6 - 00000000 - key: always reads zero
page 44: 176B0000 - 00000000 - PACK: always reads zero
Apparently the printer has modified the tag more than expected.
Especially
- page 2 lock bits have been set locking some pages
- page 8 (material and tempeature) has been modified (last byte)
- page 11 should be the same as page 10 but has been set the the previous available lenth
- page 20-23 contain the remaining length as expected
- page 41 remains unchanged leaving authentication disabled
- pages 6, 7, 15, 16 (originally blank) are filled with data
Conclusion:
The NTAG Edit Tool still seems to work with the latest firmware of the Da Vinci Nano.
However it seems like some pages are used differently than found in many reports like
http://www.soliforum.com/topic/15815/xy … w-hacking/
Maybe someone has some more insights on this.
Are there any good reasons updating the firmware of the printer?
Doing this may risk that the generated tag doesn't work any more. Or am I wrong?
- carl_m1968
- Member
- Offline
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
The rule of thump for Printer firmware updates for any brand printer or for any device really is that unless an update says it will fix a specific issue you have then don't update.
Most of the time an update usually breaks more than it fixes.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
- modfreakz
- Member
- Offline
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
droolingFox wrote:
Are there any good reasons updating the firmware of the printer?
Doing this may risk that the generated tag doesn't work any more. Or am I wrong?
Your TAG is partially locked and is garbage now. Use EmuTag or Papertags.
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
Hello,
I just received my EmuTag today... but I don't get it...
What do I have to do so I can use my XYZprinting junior 1?
Thanks for anyhelp I can get
- modfreakz
- Member
- Offline
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
Hi,
use the android app from here
http://www.soliforum.com/post/152205/#p152205
- Set the switch to UNLOCK
- Read the EmuTAG with the Android app (hold the emulator under the cell phone in a 1 cm)
- still keep the EmuTAG under smartphone, select parameters and klick generate
- Set the switch to LOCK and install it in the printer
If you have forgotten something or made something wrong, simply set the switch to UNLOCK and generate new parameters. Install the LOCK position and reinstall it in the printer.
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
I did follow your instructions, here is what I have, the EmuTag in unlocked mode and when I generate tag, it tells me "succefully tranfered" But on my printer it says "unidentified spoll".
modfreakz wrote:
Hi,
use the android app from here
http://www.soliforum.com/post/152205/#p152205- Set the switch to UNLOCK
- Read the EmuTAG with the Android app (hold the emulator under the cell phone in a 1 cm)
- still keep the EmuTAG under smartphone, select parameters and klick generate
- Set the switch to LOCK and install it in the printerIf you have forgotten something or made something wrong, simply set the switch to UNLOCK and generate new parameters. Install the LOCK position and reinstall it in the printer.
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
And it always tells me " tag status: locked"
- modfreakz
- Member
- Offline
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
After transfere the parameter to Emutag, I lock it like original TAGs to be more genuine/authentic.
Your problem is not here.
Please try use "Valid/Random UID" option
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
Still the same problem... is there a way to use Windows 10... I downloaded the program, but don't know how to make it work?
- modfreakz
- Member
- Offline
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
your batteries are empty, use usb cable with wall charger.
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
Thanks alot... that did solve my problem. It is working now.
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
Well, i was thinking of doing same solution like Klaus but i see the EmuTag costs 40$ ... well i found an official unlock-tag in the oficcial xyz-store for 59, after registering that with your printer you never again have to rewrite or so, just hanging it over spoolholder and done....seems the better solution in 2020.
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
But all sold out, if you ever get it let us know!
43 2020-01-31 03:15:09 (edited by klaus 2020-01-31 03:15:29)
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
There is just one thing missing with modfreakz Emultag is one right spool holder... for the junior 1
- modfreakz
- Member
- Offline
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
I think you missed it.
for example here is something...
https://www.thingiverse.com/thing:2218831
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
Hi all, I have received one <open smart tag>. Before activation, DaVinci shows the following:<unidentified spool>.
You need to run XYZ Ware and activate the Tag. Activation is associated with a specific printer and cannot be canceled (you must confirm this before activating).
Once activated, the information shows that you have a filament of 1000m capacity and 1100m available. It's strange and I wonder how it will work.
If interested, I can keep you informed. See attached photos.
Regards Vaclav
46 2020-03-01 23:05:11 (edited by redkurn 2020-03-03 12:34:10)
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
isaryk wrote:
Hi all, I have received one <open smart tag>. Before activation, DaVinci shows the following:<unidentified spool>.
You need to run XYZ Ware and activate the Tag. Activation is associated with a specific printer and cannot be canceled (you must confirm this before activating).
Once activated, the information shows that you have a filament of 1000m capacity and 1100m available. It's strange and I wonder how it will work.
If interested, I can keep you informed. See attached photos.Regards Vaclav
How does it work?
I’m considering this over the other choices.
May not need this after all, see my post:
http://www.soliforum.com/topic/18456/da … e-248-bug/
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
Hi,
it works the same as if you had paper tags there, but the length doesn't decrease.
Regards
Vaclav
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
Hello
I own a MacBook with an Windows 7 Pro Virtualisation over WM Fusion!
What kind of Hardware do I need to connect an NFC Reader/Writer? I suppose this is an USB-Based Part. Any Links
Also any experience with MacBook/Virtualisation/Windows 7
(I refuse to install Windows 10, I refuse to buy an google based Handy) Also I have an Thinkpad with Ubuntu but this hast no RFC Hardware and I think this Software isn't available vor Linux/Unix
Regards
Gérard
49 2020-06-10 17:23:01 (edited by GerardDirks 2020-06-10 17:26:46)
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
Hello
I got my ARC122 USB CardWriter/Reader. I tried a couple of Windows Software. I am able to read al my TAGS, but nothing else! I Tried the following Programs; NFC21 Tool, GoToTags Windows, nfctoolts-latest (nfctoolsgui.exe)
Because I refuse to buy/use an Android Phone for this purpose! I need a Windows or Mac Solution!
I also have a MacBook with both (10.13 & 10.15). If their is software for this it would be also great, but windows would be easier because the NFC Edit Tool only runs on windows?. Are their any instruction for doing the Edit/Write on Windows?
Re: NTAG Edit Tool - [DaVinci Junior & Mini]
Hello Fellows
I lost the interest in the "da Vinci mini w" and their Concept of TAGS etc. I will sell it in ebay.ch or Ricardo.ch and buy an Resin 3D Printer which is also better choice for my purpose! (Figures für RC Boats).
The Reasons:
1) that XYZPrinting break my 3D Printer with Error 0061 after Firmware Update and want money to sell me a new mainboard
2) the killing the TAG of my Original Rolls of Filament that disabling of original NFC Chip because I downgrade to an older Firmware.
3) I lost my WLAN functionality after downloaded to 1.2.9. (1.1.9 gives me back WLAN but killed my last spare NFC Tag)
4) the Windows Software for NFC CardWriter/Reader doesn't allow me to reformat(initialize) and edit the paperchips. I am only able to read Parts of the NFC tag
I only want to print some Figures, not playing with buggy Firmware and TAGS Issues. I am not an masochist ;-)
Strange is that nobody is able to help me with the Windows Issues? I don't want an Android Phone to program the TAGS. I thought 90% of the Users worldwide uses Windows, so 90% of the 3D Printer will be get prints of Windows based PC's