degrassijrhi wrote:It's a solidoodle press.
That would be most logical since you did post this in the Press section. Sorry I missed that earlier.
Are you saying the threaded rod is bent or the guide rods are bent? Either way, these are easy things to find replacements for. If it's the guide rods all you have to do is measure them and find a suitable replacement on Amazon. If it is the threaded rod and it is pressed onto the motor like other SD models, You'll have a couple options. Often times the rod isn't bent, rather they were drilled poorly and are out of center. You could try and separate the rod from the motor and use an old ham style or similar coupler. If the rod is indeed bent the same process would apply but with a replacement threaded rod.
Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions