Re: DaVinci Junior cartridge reset
Hey cgrillo My readout is:
Page:Data
[00]:041FB625
[01]:229A3D81
[02]:4480000
[03]:E1101200
[04]:0103A00C
[05]:340300FE
[06]:0000000
[07]:0000000
Thanks !
You are not logged in. Please login or register.
SoliForum - 3D Printing Community → XYZ Printing Hacks & Mods → DaVinci Junior cartridge reset
Hey cgrillo My readout is:
Page:Data
[00]:041FB625
[01]:229A3D81
[02]:4480000
[03]:E1101200
[04]:0103A00C
[05]:340300FE
[06]:0000000
[07]:0000000
Thanks !
Thanks cgrillo it worked again.
Your Card UID is 04 fb 0f 92 12 4a 80
And the password should be: 29 3e 49 5f
Pack code is D3 60
and for the one below
Pack code is 16 6E
UID 04 12 D6 32 B4 42 81
Password should be:-
7C AA F0 4D
sorry isaacesp is the bottom one mine? I am getting a Action Failed error.
Also another question. I am on firmware 1.15.0, should I upgrade to something in the low 2's? Is their any benefit?
NO! I see no benefit from doing any upgrades. If it aint broke don't fix it.
Fair enough! Its printing great as it is, I just want to use cheap PLA and perhaps add a heated bed for ABS one day.
This is my chip readout again if anyone can check the code please.
Page:Data
[00]:041FB625
[01]:229A3D81
[02]:04480000
[03]:E1101200
[04]:0103A00C
[05]:340300FE
[06]:0000000
[07]:0000000
Thanks !
Hey cgrillo and everyone Else
It would be Great if someone could generate a Pass for my Data.
Thanks in advance, and Happy printing!!
[ 04:0D:94:15 ] Sektor 00 : UID0 - UID2 / BCC0
[ 8A:3E:4D:81 ] Sektor 01 : UID3 - UDI6
[ 78:48:00:00 ] Sektor 02 : BCC1 / INT. / LOCK0 - LOCK1
[ E1:10:12:00 ] Sektor 03 : OTP0 - OTP3
[ 01:03:A0:0C ] Sektor 04 : DATA
[ 34:03:00:FE ] Sektor 05 : DATA
[ 00:00:00:00 ] Sektor 06 : DATA
[ 00:00:00:00 ] Sektor 07 : DATA
@cgrillo
Could you help me with the password, please? thank you very much
page: Data
[00]:0477A853
[01]:229A3D80
[02]:05480000
[03]:E1101200
[04]:0103A00C
[05]:340300FE
[06]:00000000
[07]:00000000
Hi Bozotclown1970
I noticed on my other spool that page 09 had to remain the same if not it gives error.
Page 14 also has to remain the same or same error and that 15,16 and 17 change back to the original values when 14 and 09 when back to the original values.
Hello. CGRILLO, the password seems to be correct. I can rewrite data from page 3 to the end.
But there is some strange. My page 2 value has changed, and I cant write it again.
I cant modify page oo and 01. Is there a way to changed this data?
Furthermore I cant print now. The page 20 (14HEX) must to be set to zero, in other case the printer do not recognized the cartidge. Maybe is a problem with the firmware?
How can i downgrade?
Password should be:-
0F 79 EC 50Please let me know if it's correct or not.
jjsc78 wrote:Hi, could somebody help me with the pasword for this card?
page:Data
[00]:04B46F57
[01]:22973C80
[02]:09480000
[03]:E1101200
[04]:0103A00C
[05]:340307D1
[06]:01035482
[07]:656EFE00
Thanks in advance...
Hi Bozotclown1970
I noticed on my other spool that page 09 had to remain the same if not it gives error.
Page 14 also has to remain the same or same error and that 15,16 and 17 change back to the original values when 14 and 09 when back to the original values.
isaacesp,
If you are have a JR. Don't be surprised one day after you reset your tag that you receive the dreaded "Unidentified Card" message. When you do, just up the last byte of page one by one. I have had to do this many times. I am not sure, but I think it may have something to do with the unload/load filament function in the printer. The last time I had this the byte was set at 59 so I tried 5A but still got the error. After much trial and error I was able to get it working by changing the last two byes to 40.
One other note. I believe if you read this whole thread. You will find somewhere that you should not run the tag down to 00 00 00 00. I reset mine to 300m and reset it back when I get to 100m.
I am not trying to be argumentative just telling you what I have experienced.
Hello. CGRILLO, the password seems to be correct. I can rewrite data from page 3 to the end.
But there is some strange. My page 2 value has changed, and I cant write it again.
I cant modify page oo and 01. Is there a way to changed this data?
Furthermore I cant print now. The page 20 (14HEX) must to be set to zero, in other case the printer do not recognized the cartidge. Maybe is a problem with the firmware?
How can i downgrade?
What version of firmware are you running and what is the new ID??
hi!
version:2.2.6
NEW ID: 09488000
jjsc78 wrote:Hello. CGRILLO, the password seems to be correct. I can rewrite data from page 3 to the end.
But there is some strange. My page 2 value has changed, and I cant write it again.
I cant modify page oo and 01. Is there a way to changed this data?
Furthermore I cant print now. The page 20 (14HEX) must to be set to zero, in other case the printer do not recognized the cartidge. Maybe is a problem with the firmware?
How can i downgrade?What version of firmware are you running and what is the new ID??
That does not look like a valid ID. It should be 14 bytes long. Yours is only 8 bytes long. Give us pages one and two from your reader.
That does not look like a valid ID. It should be 14 bytes long. Yours is only 8 bytes long. Give us pages one and two from your reader.
page 00: and 01 has not changed...
[00]:04 b4 6f 57
[01]:22 97 3c 80
[02]:09 48 00 00 has changed to 09 48 80 00
jjsc78,
From what I can find. The first 4 bytes cannot be modified, but the last 4 bytes are the "Lock bits". If XYZ has decided to update the lock bits that will lock the whole tag for read only resulting in an unusable tag. Again, this is just what I think, not a known fact since I have no idea what values were there prior to it being changed.
My page 2 value has changed, and I cant write it again.
Are you sure that you did not update any of the last 4 bytes of Page 02? These bytes will put the tag in read only mode and cannot be reversed. It sounds like that is what happened. Firmware will not correct this problem.
I have two cards one newer been in printer second was in but do not used
first UID 0416BB2A973C81 Pass D7B7B937 PACK 1A64
second UID 042F5222973C80 Pass 336C0492 PACK 1A64
Interesting PACK same.
Have more cards but all them pack diferent
Has anyone with the DaVinci mini had success, I have the password an able to change pages 0A,0B,14,15,16 and 17 the software reads 200m and 200m left but when it's time to print it says error cartridge not recognized. Is there a way to change the serial number of the cartridge? by the way I'm using the android way.
Hello, I've the same problem with my Da Vinci Mini.
The printer stores the filament length somewhere and block the trick to "reload filament" in the tag.
I'm looking for a way to erase the informations in the printer... help welcome
isaacesp wrote:Has anyone with the DaVinci mini had success, I have the password an able to change pages 0A,0B,14,15,16 and 17 the software reads 200m and 200m left but when it's time to print it says error cartridge not recognized. Is there a way to change the serial number of the cartridge? by the way I'm using the android way.
Hello, I've the same problem with my Da Vinci Mini.
The printer stores the filament length somewhere and block the trick to "reload filament" in the tag.I'm looking for a way to erase the informations in the printer... help welcome
Post a new thread, not on page 45 of a thread about a specific topic.
Post a new thread, not on page 45 of a thread about a specific topic.
I don't understand your message... It's not a new subject. Da Vinci Jr and Mini use the same cartridge, the same algo and the same protection against tag modifications... Could you tell me more ?
My son play with nfc Apps in android ...
With the old Chip ... je press clean nfc ...
je was Wondering what the xyz Program Show ... but we cant Print with this nfc
It Show 9999 Meter of filament !?
My son play with nfc Apps in android ...
With the old Chip ... je press clean nfc ...
je was Wondering what the xyz Program Show ... but we cant Print with this nfc
It Show 9999 Meter of filament !?
The tag is locked, sorry, look at page 02 in the tag : if you have some FFFF it's dead :\
I feel the asking for passwords has taken over the thread slightly - so can you please PM (not email) me data from Pages 0 & 1, so I can get the UID and get a password.
I will still do it free of charge and only ask for the PACK code in return.
I will compile a list of UIDs, Passwords and PACKs and will share that to those that are looking into cracking the algorithm used (please let me know who you are as I'm way to lazy to trawl back though previous the 40+ pages)
Charlie
Hi I'm new here, can anyone please help me to rest my printers nfc tag ?
SoliForum - 3D Printing Community → XYZ Printing Hacks & Mods → DaVinci Junior cartridge reset
Powered by PunBB, supported by Informer Technologies, Inc.