Topic: Issues with new Delta printer.
I recently built a Delta and for about a week it ran great. Nothing over heating, no weird sounds or vibrations. It is based on a Ramps 1.4 and is using a power supply that claims a 30 amp rating.
The issue is that once the print starts the bed temp will continuousy fall and at about 5 or so minutes into the print the LCD will flicker and all the motors will lock up and just buzz. The hotend wil stay at temp and the logic thinks it is still printing. But if I print live it losses comm with the host as well.
So does this sound like a failing power supply or did I get one of those junk Ramps some are talking about?
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.