Topic: Solidoodle 2 - Screeching sound when getting started for print
Hey all,
Since a couple of weeks I have a very annoying problem with my Solidoodle 2.
It hasn't been modified or anything, everything is as original as it gets.
The problem is when the print is started, the print seems to go to a park position that's incorrect.
It makes a very loud screeching noise for a couple of seconds, and after that the print starts and finishes without any problems.
After the print is finished however, it makes the same annoying sound again and after that it goes to the park position.
The hardware seems to be fine. The switch that should tell the Solidoodle it has reached it's max does work, also the motors don't make any weird sounds.
I've made a small video so you can see what it sounds/looks like:
What i've tried:
- Repetier Host version 0.85.117 and the latest 1.0.6.
- Set park position to X:140 Y:140 Z-min:50 mm
- Printer type: L_CARTISAN_PRINTER and L_CARTISAN_PRINTER_DUMP
- Print area: Width: 140 Depth: 140 Hieght: 140 mm
If anyone has an idea what it could be, please feel free to comment