Re: E3D Lite6 (A $35 hotend!) Discussion
I'm guessing 63. Assuming all of the packages are E3D lite6's.
- heartless
- Member
- Offline
Re: E3D Lite6 (A $35 hotend!) Discussion
elmoret wrote:
Link fixed, sorry guys!
See - it wasnt me (or madkow007, LOL)! LOL
I will stick with the guess of 77 
SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1
Re: E3D Lite6 (A $35 hotend!) Discussion
I'm guessing 55.
Re: E3D Lite6 (A $35 hotend!) Discussion
88.
Re: E3D Lite6 (A $35 hotend!) Discussion
FelixP wrote:
I'm guessing 63. Assuming all of the packages are E3D lite6's.
63 is the correct answer! PM me for your coupon code, or if you don't have a use for it I can do a coupon code for $35 off anything in the store.
- AZERATE
- PRINTiT
- Offline
Re: E3D Lite6 (A $35 hotend!) Discussion
^
Quality service E3D clone companies/distributors cannot buy
Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!
Re: E3D Lite6 (A $35 hotend!) Discussion
My guess is 67.
Re: E3D Lite6 (A $35 hotend!) Discussion
Holy crumb crusted mac and cheese! I guessed it right?! I never win these kinds of things. 
this is so cool! Thanks Elmoret I will pm you in a bit.
Re: E3D Lite6 (A $35 hotend!) Discussion
hey i'm just impressed my blind first guess was so close lol
Re: E3D Lite6 (A $35 hotend!) Discussion
elmoret wrote:
FelixP wrote:I'm guessing 63. Assuming all of the packages are E3D lite6's.
63 is the correct answer! PM me for your coupon code, or if you don't have a use for it I can do a coupon code for $35 off anything in the store.
D'oh! I'm such an idiot! How did I miss that post?
- heartless
- Member
- Offline
Re: E3D Lite6 (A $35 hotend!) Discussion
Ok, I have some questions about the Lite6 for Mr. Filastruder/elmoret...
on E3D-online site they mention an "upgrade kit" to upgrade the lite to a full blown v6
- what would that kit include?
- what is the availability of a kit?
- and what would the cost be?
VERY seriously thinking about pulling the trigger on a Lite6, and the answers to the above questions will be the deciding factor
(and yes, the purchase would be made thru Filastruder. )
SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1
Re: E3D Lite6 (A $35 hotend!) Discussion
Its really not much of a "kit", you just need a 1.75mm heatbreak and a 1.75mm heatsink. Both of those parts have been and will be available for a long time.
- heartless
- Member
- Offline
Re: E3D Lite6 (A $35 hotend!) Discussion
elmoret wrote:
Its really not much of a "kit", you just need a 1.75mm heatbreak and a 1.75mm heatsink. Both of those parts have been and will be available for a long time.
that is kind of what I was thinking, but thank you very much for taking the time to answer. 
SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1
Re: E3D Lite6 (A $35 hotend!) Discussion
Just about to order one of these for my Mini Kossel. What is the difference between the Bowden version and universal? I already have 10 feet of PTFE tubing for 1.75mm filament.
Re: E3D Lite6 (A $35 hotend!) Discussion
Bowden comes with 750mm of PTFE tubing and a PTC connector for the extruder end.
Sounds like the Universal/Direct is for you, plus a threaded bowden coupling ($39 total).
Re: E3D Lite6 (A $35 hotend!) Discussion
elmoret wrote:
Bowden comes with 750mm of PTFE tubing and a PTC connector for the extruder end.
Sounds like the Universal/Direct is for you, plus a threaded bowden coupling ($39 total).
Ended up with the Bowden version. By far the best hot end I've ever used!
Plan to order the V6 heatsink and heat break for my second Lite6 I just ordered to see how the E3D V6 compares. I honestly expect the Lite6 to meet or exceed the V6's print quality but it'll still be nice to have for higher temperature materials either way.
Re: E3D Lite6 (A $35 hotend!) Discussion
Those are some seriously nice prints! Good job.
SD4 w/ RUMBA, E3D Volcano, all bearings, glass bed
- heartless
- Member
- Offline
Re: E3D Lite6 (A $35 hotend!) Discussion
yeah, those are some awesome prints - makes me want to give up - mine don't look anywhere near that nice with the v6... 
SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1