Topic: Guide bars printable
Hi, ive just about completed everything and was wondering if anyone has the 3d files for the guide bars and the bits to hold on the holes of the fan so I can print and add to my filastruder enclosure.
Thanks
Neil
You are not logged in. Please login or register.
SoliForum - 3D Printing Community → Filastruder → Guide bars printable
Hi, ive just about completed everything and was wondering if anyone has the 3d files for the guide bars and the bits to hold on the holes of the fan so I can print and add to my filastruder enclosure.
Thanks
Neil
I'm not sure which type of enclosure you are using but I know the parts for the one we designed can be found on thingiverse.
http://www.thingiverse.com/thing:105877
Hope that helps.
Cheers thats the one im after
Would you have the guide bars somewhere else, the actual bars appear to be a circle thats only 1 layer in height when put through either skienforge or pronterface. the base V2 works fine.
This should work.
https://www.dropbox.com/s/s35tn9lee0wvr … %20Bar.stl
Thanks, this had the same issue, so opened in tinkercad and found the reason, its very very small, so ive increased its size a good few hundred percent.
Thanks again
Neil
inches = 25.4 mm. You can scale by that factor if needed. STLs are unitless, the units are assumed by the slicing software.
SoliForum - 3D Printing Community → Filastruder → Guide bars printable
Powered by PunBB, supported by Informer Technologies, Inc.