26 Reply by ammarqs

  • ammarqs
  • Member
  • Offline
  • Registered: 2019-02-12
  • Posts: 31

Re: How to identify a temperature sensor on a solidoodle

This is the extruder settings in configuration.

http://soliforum.com/i/?fBV4znY.png

27 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: How to identify a temperature sensor on a solidoodle

When you calibrated your print height you need to let a print start then turn off the power leaving the bed at the height it is move the head around by hand and adjust the bed using the adjusters. From what I see in your gcode you have a 15mm offset on your Z at start. The offset supposed to be at a value that get the head to be about .5mm from the bed and then you fine tune using the calibration.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

28 Reply by PIFOUBMW

  • PIFOUBMW
  • Newbie
  • Offline
  • Registered: 2021-07-09
  • Posts: 1

Re: How to identify a temperature sensor on a solidoodle

ammarqs wrote:

http://soliforum.com/i/?OaX4ggY.png

On my SOLIDOODLE 3, if I choose more than 195°C, the printer failed. Then It is a problem for me to find good ABS able to work at this maximum temp.