Topic: Help with putting e3d v6 in solidoodle 4
Hey guys. I'm trying to put my e3d v6 in my solidoodle 4. I'm having trouble figuring out what to do with the wiring. The fan and thermistor are normal little connectors, but the heat thing is just these 2 thick wires with these weird thick pins. I have no clue how to connect these or what I need to buy. I could technically solder them to the little red plug for my stock wiring./ But idk what the norm to do is, the little wiki guides I found didnt really touch on this stuff. On the board theres this 4 pin connector that goes to the red and blue stock plugs, so the easiest option would be to solder to those. But idk if thats what I should do or not. And I dont know where to plug the fan in so that it will properly cool the v6. I havent tried any firmware stuff but I did see the thread on that so I shouldnt need help with that yet. I just wanted to get everything plugged in first. Thanks for any help.