Topic: Da Vinci Pro Nozzle 0011 Error - 5 Degrees Less Consistently!
Hello,
I bought this printer 3rd party from someone on Facebook, and my initial research didn't show any glaring issues with the brand, so I went for it. Knowing that, I can't even send it in for support if this issue is as bad as I keep seeing that it is. I tried to calibrate the bed as a first step, and the printer tries to heat up to the temperature that the PLA is set to (initially was set to 210C), but it only heats to 205 and stays there for some time before failing the calibration and giving the 0011 error. I set the filament settings to heat to 205, and it heats to 200 before the same thing happens.
The bed heats flawlessly, maybe a little slowly for my preference, but it does the job.
I haven't seen anything online about my specific error. Is it the dreaded 0011 error or could it be firmware? I updated to the latest version after trying to calibrate, and even after the update it kept happening.
Thanks.