Topic: New build - No power to the motor
Hi all,
I have just built the Filastruder and i'm not recieving any power to the motor.
The PID turns on, and I can measure a voltage difference of 12V when not heating (0.6V when heating), however when I turn the motor switch on, the PID turns off and the voltage difference is 0.6V.
The stall protection LCD does not turn on at all. I have tried to adjust CC/CV however that also does nothing. The fans also do not turn on. Just the PID and the heater seem to work.
Does anyone have any ideas on what I can do?