Re: what 3d printer should i get
Not to burst your bubble but this is a Chinese machine.
I see no usa suprt for it . about the only protection you will get if you buy from amazon you can return it. if you go to the quidi web page you will find firmware to be a dead link. the only support seems to be through e mail. In other words expect no support the link I found for parts were e- packet from china https://store3dprinters.com/product/qid … therboard/
you can get mother boards but who knows what drivers they are using. the one plus I see is you can plug in regular replacements.
whatever printer you decide on make sure parts are available . make sure firmware is available and you can adjust as needed and make sure there is some kind of real support.
Seriosly if you are going to put out a grand for a printer you need to KNOW it works. You need to know where to get parts and you need to have accessibility to firmware.
Pthe prussa is the most copied printer out there. And I have never heard any serious complains about one.
It uses standard available parts.
take a real good look at a prusa and the company before you shell out the doe.
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura