1 Topic by william1944

  • william1944
  • Newbie
  • Offline
  • Registered: 2019-07-01
  • Posts: 4

Topic: Junior 1.0 and error code 00030

I have a junior 1.0 and have developed an error code 0030 and a grinding sound when initialising and the head moves top the left. I have seen some of the videos regarding the junior pro but I do not have any wires or sight of a sensor. Is the layout different on my junior 1.0. Any clues of what to do next would be welcome.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Junior 1.0 and error code 00030

william1944 wrote:

I have a junior 1.0 and have developed an error code 0030 and a grinding sound when initialising and the head moves top the left. I have seen some of the videos regarding the junior pro but I do not have any wires or sight of a sensor. Is the layout different on my junior 1.0. Any clues of what to do next would be welcome.

See this thread..

http://www.soliforum.com/topic/16974/da … rror-0030/

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by william1944

  • william1944
  • Newbie
  • Offline
  • Registered: 2019-07-01
  • Posts: 4

Re: Junior 1.0 and error code 00030

I think that this thread refers to the junior pro not my junior 1.0  the layout is different. I tried to rewind the Z axis by hand but its too stiff any other ideas please.

4 Reply by william1944

  • william1944
  • Newbie
  • Offline
  • Registered: 2019-07-01
  • Posts: 4

Re: Junior 1.0 and error code 00030

I think that this thread refers to the junior pro not my junior 1.0  the layout is different. I tried to rewind the Z axis by hand but its too stiff any other ideas please.

5 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Junior 1.0 and error code 00030

william1944 wrote:

I think that this thread refers to the junior pro not my junior 1.0  the layout is different. I tried to rewind the Z axis by hand but its too stiff any other ideas please.


You can't do with power applied.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

6 Reply by william1944

  • william1944
  • Newbie
  • Offline
  • Registered: 2019-07-01
  • Posts: 4

Re: Junior 1.0 and error code 00030

I tried without power, still unable to rewind by hand. Is there any other way to reset x,y, and Z axis