Re: Solidoodle 3 Heatbed No Longer Working
This is the firmware version you'll want to use. https://github.com/ozadr1an/Solidoodle- … in_v1_beta
Make sure you have selected the correct board number 62 in the configuration.h
As for the reset button, don't hold it down. Just a quick click before pressing upload should work.
If for some reason there is no bootloader on your board send me a PM but I doubt that is the case. What serial number is your printer?
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions