Topic: Da Vinci Pro Warped Print Bed
I've had my XYZ Da Vinci Pro for 4 years now and have always had issues with it. Starting with calibration falling after the first week. I have never used the Printer as much as I liked do to it being so frustrating, but during printing some smaller items I noticed that when I printed one of the items things were fine but the moment I printed 2 or more the items I noticed it wouldn't print in areas as it got closer to the outside of the bed. Then one it moved away it would over push out filament from the Pressure of no being able to push out filament. It doesn't even push out the first two lines the XYZ software does to get the filament flowing just track marks from the print head or a micro thin layer of plastic. After some testing and leveling the print bed I have figured out the print bed bows .2mm down or more in the middle then where the leveling screws are. its even worse between the front corners. I contacted xyz about it to see what they say but figured I would let you all know about the issue to see if its a common issue or just my printer.