26 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Standards in FDM, et al.

From your lack of response can i assume you finally got the answers you were looking for ?

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

27 Reply by mark.giblin

  • mark.giblin
  • mark.giblin
  • Member
  • Offline
  • From: Nottingham
  • Registered: 2018-03-26
  • Posts: 152

Re: Standards in FDM, et al.

Fell down a rabbit hole. Not literally or figuratively... Laid up with a poorly back from the incident. today is the first day I can actually sit down... I have a damaged Sacroiliac  and little things like sneezing, coughing or stumbling set it off and I am on my back for anything from a few days to the major marathon 9 month period I spent mostly laying down because I couldn't stand for more than a few minutes.

Yes I found that ISO standards exist for several control languages and a few other interesting bits of information that has helped a little. Still looking, can't afford the £40 for the ISO standard booklet.

Bob's your uncle (and likely your father too...)
I laughed that hard, I burst my colostomy bag.... (When I got my GeeeTech Pi3 ProB)
Prusa i3 MK2 clone by GeeeTech aka Pi3 ProB with a GT2560 board on MX17 Linux.

28 Reply by Tin Falcon (edited by Tin Falcon 2018-07-19 00:45:19)

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Standards in FDM, et al.

There is apparently some effort to create standards for reprap

https://reprap.org/wiki/RepRap_Interface_Standard

https://www.reprap.org/wiki/Standards_Development

https://reprap.org/wiki/Motor_Shield_Standard

https://reprap.org/wiki/Groove_Mount

https://reprap.org/wiki/Vertical_X_Axis_Standard

https://reprap.org/wiki/Prusa_i3


NIST National Institute of standards & Technology has some interesting material related to polymer based additive
manufacturing





https://nvlpubs.nist.gov/nistpubs/ams/N … .100-5.pdf

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

29 Reply by mark.giblin

  • mark.giblin
  • mark.giblin
  • Member
  • Offline
  • From: Nottingham
  • Registered: 2018-03-26
  • Posts: 152

Re: Standards in FDM, et al.

Great stuff, going to have a read of it.

Been busy with other stuff, so I will be in and out from time to time.

This is the sort of information that is useful to archive, these days you can't rely on the internet persisting or links surviving as sites neglect the most basic of things, rerouting of old URL's in to the new style so that old material can be accessed.

So its a good idea to PDF the item by printing it of and uploading it as a document to the site for reference.

My data doesn't click over for another week, so I am stuck with surfing a few hours a day, an upload would kill my data very quickly.

Bob's your uncle (and likely your father too...)
I laughed that hard, I burst my colostomy bag.... (When I got my GeeeTech Pi3 ProB)
Prusa i3 MK2 clone by GeeeTech aka Pi3 ProB with a GT2560 board on MX17 Linux.