Topic: PTFE FIXING FOR DA VINCI JUNIOR (UK)
Hi,
Does anyone know where i can buy in the uk the PTFE fixing i think it's a M5 X 4mm size, but not sure !!
Hope someone can advise,
Thanks
Frank.
You are not logged in. Please login or register.
SoliForum - 3D Printing Community → XYZ Printing Help/Repair/Maintenance → PTFE FIXING FOR DA VINCI JUNIOR (UK)
Hi,
Does anyone know where i can buy in the uk the PTFE fixing i think it's a M5 X 4mm size, but not sure !!
Hope someone can advise,
Thanks
Frank.
https://www.amazon.co.uk/s/ref=nb_sb_no … 3d+printer
If you are going to use it on Jr. extruder side, you need PC4-M6
https://www.amazon.co.uk/s/ref=nb_sb_no … 3d+printer
If you are going to use it on Jr. extruder side, you need PC4-M6
PC4-M6 Does not fit, i bought 2 and both no use...must be PC4-M5 maybe.?
PC4-M6 is the right one, it is secured by a nut inside the extruder, do not screw into the plastic.
PC4-M6 is the right one, it is secured by a nut inside the extruder, do not screw into the plastic.
They must have used a differant size on mine, M6 thread would not not screw into the nut inside the extruder, i bought 2 M5's and they fitted perfectly..very odd..
yizhou.he wrote:PC4-M6 is the right one, it is secured by a nut inside the extruder, do not screw into the plastic.
They must have used a differant size on mine, M6 thread would not not screw into the nut inside the extruder, i bought 2 M5's and they fitted perfectly..very odd..
That is possible. Your extruder cover is white, but mine is transparent gray. You may have later model. Check to make sure what you have is DA VINCI Jr. 1.0 but not DA VINCI Jr. 1.0A or DA VINCI Jr. Pro
frank28 wrote:yizhou.he wrote:PC4-M6 is the right one, it is secured by a nut inside the extruder, do not screw into the plastic.
They must have used a differant size on mine, M6 thread would not not screw into the nut inside the extruder, i bought 2 M5's and they fitted perfectly..very odd..
That is possible. Your extruder cover is white, but mine is transparent gray. You may have later model. Check to make sure what you have is DA VINCI Jr. 1.0 but not DA VINCI Jr. 1.0A or DA VINCI Jr. Pro
frank28 wrote:yizhou.he wrote:PC4-M6 is the right one, it is secured by a nut inside the extruder, do not screw into the plastic.
They must have used a differant size on mine, M6 thread would not not screw into the nut inside the extruder, i bought 2 M5's and they fitted perfectly..very odd..
That is possible. Your extruder cover is white, but mine is transparent gray. You may have later model. Check to make sure what you have is DA VINCI Jr. 1.0 but not DA VINCI Jr. 1.0A or DA VINCI Jr. Pro
Yeah, just checked on the box it came in, it's a DA Vinci Junior 1.0, it has a white extruder cover, and can confirm it takes M5X4mm fitting, typical of xyz to fit differant parts, they seem to be known for this...good to know tho! thanks for the help.
SoliForum - 3D Printing Community → XYZ Printing Help/Repair/Maintenance → PTFE FIXING FOR DA VINCI JUNIOR (UK)
Powered by PunBB, supported by Informer Technologies, Inc.