Topic: E3D V6 on a CTC Dual
I am looking to convert my CTC from the MK10 extruders and hot ends it has to E3D V6 with Bowden. Those who may not know the CTC is a 24V system and uses thermocouples instead of thermistors.
So I see there are 24 volt version of the E3D and if I order two of them can I get them with thermocouples instead of thermistors? I can chnage the inputs on the Azteeg X5 I have controlling it but it means changing pin mapping in the firmware and that is just a pain and I am not sure what the original pins for thermistors where so additional research would need to be done. Aside from the carriage and some tweaking I was just hoping for a near drop in.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.