Topic: Da Vinci Pro Feeder Tube Detached
I was printing today and my feed tube came undone from the unit and the extruder no long will take in the filament. Without the tube directing the filament and providing resistance onto the extruder the filament now feeds out the open hole and just goes everywhere. Ive tried pushing the tube back in but the result is always the same... it just pops back out and I am unable to print anything.
FYI: I initially thought the extruder was not feeding, thus being clogged.. but I have throughly cleaned the nozzle using the supplied wire. I have run the wire straight through the nozzle and pulled it through the top of the extruder. I have unloaded and loaded the filament without error.... if I manually hold the tube down it seems to work.. but the moment I let go and the force becomes too much the tube pops out and the filament no longer extrudes.
I attached a pic just in case.
Any ideas?