Topic: help with pins RP2
I am using a raspberry pi 2 to run the freelss software. When I run the software, the lasers don't turn on, and the turn table does not move. However it still runs and takes about 6 minutes to do a scan(obviously it doesn't scan anything). I have code written in python to see if i can turn on the lasers and move the turn table, which I have done with success, but when the freelss code runs they don't do anything. The pins on this pi are different from the pins on the Raspberry Pi B+ model. Maybe I have wired the pins wrong. I have the lasers hooked up to pin # 13(GPIO 27) and pin #15(GPIO 22) on the RP2. Then I went to the code in my freelss directory and modified the setup.cpp file. I went to where it says rightLaserPin(5) and leftLaserPin(4) and changed the number to a 13 and 15 respectively for the lasers. Is there something else that i need to do? Do i also need to change the code somewhere else? Or am I on the wrong track all together? PLEASE HELP