26 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: Daily post infill----nofill

Nozzle diameter .40
Extrusion widths .48
Rectilinear infill 1
Layer height .2963
Filament diameter = actual measurement
Extrusion multiplier should be in the .8 range

I don't know what slicer version but I will look in a bit.
Your profile is the issue I see problems everywhere so when I get a chance I'll shoot you screenshots but it won't be for a while.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

27 Reply by OneMoreCast

  • OneMoreCast
  • OneMoreCast
  • Member
  • Offline
  • From: Long Island, NY
  • Registered: 2015-01-02
  • Posts: 334

Re: Daily post infill----nofill

Ahhhh ok, I see what happened in our talking and what I messed up w nozzle. No rush greatly appreciated, I'm making do w Cura for now

"All your base are belong to us." SD4 with a RUMBA, supernight PS, 40mm fan on X motor, lawsey carriages with new better tolerance rods, flanged rear bearings, new NEMA 17 with leadscrew on Z-Axis, and e3d v6 with MK5.


Ward and Jago are my heroes tongue

OneMoreCast's Website