Topic: Help with print issues
Today I upgraded to repetier1.03. I got one good print and now the print head will only squirt four huge globs in each corner of the print and wont squirt any filament anywhere else.
Anyone ever seen this?
Re: Help with print issues
Ok here's the weird thing, before my flow rate on the printer was set at 100% and the slicer was set to 105%. I was getting decent prints.
Now I just set the printer flow rate to 50% and the slicer flow rate to 1% just to see what it would do and I am so far getting a good print. I'm baffled.
3 2014-08-24 05:20:23 (edited by n2ri 2014-08-24 05:21:01)
Re: Help with print issues
have you selected material type in slicer menu on RH?
also printer type
Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs
Re: Help with print issues
n2ri wrote:
have you selected material type in slicer menu on RH?
also printer type
Yes I have everything correct but after the update something changed. It is printing quite well now with the filament flow in Repetier set to 1% and the printer set to 100% flow. IDK