1 Topic by tomasla

  • tomasla
  • tomasla
  • Member
  • Offline
  • From: mexico
  • Registered: 2014-08-04
  • Posts: 23

Topic: pig character iphone case

a friend ask me to do a pig character case she saw on the internet, so i just got the stl model from thinkverse, and add the ears, and model the different parts in autodesk maya... first print was no good as i forgot to level(?) the ears and the result was not pretty, at the second try the result was nice but i broke the piece in the middle ..third time was the charm and most pieces came out right at first print, but the eyes,,, just to small to print and handle, so i just improvise with a hair clip(?) sand the case and the parts and super glue all... not as nice as plastic injected stuff, but close enough, she walk away happy... lesson learned... ABS cracks soo easily and little pieces are really hard to post treat (sand, heat and glue) ...
thanks for any comments
Cheers!


http://4.bp.blogspot.com/-DbqjE_f76v8/U_LOKthhyCI/AAAAAAAAAM4/Tw1hx7UXc4c/s1600/pig%2Bcase.png

2 Reply by DePartedPrinter

  • DePartedPrinter
  • Moderator
  • Offline
  • From: Colorado
  • Registered: 2012-08-14
  • Posts: 1,478

Re: pig character iphone case

nice work. looks great!

SD2 with E3D, SD Press, Form 1+
Filastruder
NYLON (taulman): http://www.soliforum.com/topic/466/nylon/

3 Reply by AZERATE

  • AZERATE
  • AZERATE
  • PRINTiT
  • Offline
  • From: Chicago
  • Registered: 2013-11-28
  • Posts: 2,077

Re: pig character iphone case

I think I would gain some street cred with that! big_smile
Well done! Any plans on sharing the stl files?

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!

4 Reply by tomasla

  • tomasla
  • tomasla
  • Member
  • Offline
  • From: mexico
  • Registered: 2014-08-04
  • Posts: 23

Re: pig character iphone case

sure why not....here are the files,

Post's attachments

crown.stl 2.58 mb, 5 downloads since 2014-08-20 

eye white.stl 1.87 mb, 4 downloads since 2014-08-20 

nose.stl 3.56 mb, 3 downloads since 2014-08-20 

You don't have the permssions to download the attachments of this post.

5 Reply by tomasla

  • tomasla
  • tomasla
  • Member
  • Offline
  • From: mexico
  • Registered: 2014-08-04
  • Posts: 23

Re: pig character iphone case

DePartedPrinter wrote:

nice work. looks great!

Thanks!

first time uploading stls here hope they work...
cheers!

Post's attachments

case ears.stl 4.13 mb, 7 downloads since 2014-08-20 

diaper.stl 1.32 mb, 3 downloads since 2014-08-20 

hands.rar 907.98 kb, 1 downloads since 2014-08-20 

You don't have the permssions to download the attachments of this post.

6 Reply by AZERATE

  • AZERATE
  • AZERATE
  • PRINTiT
  • Offline
  • From: Chicago
  • Registered: 2013-11-28
  • Posts: 2,077

Re: pig character iphone case

This is for the iPhone 5 series?

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!

7 Reply by tomasla

  • tomasla
  • tomasla
  • Member
  • Offline
  • From: mexico
  • Registered: 2014-08-04
  • Posts: 23

Re: pig character iphone case

AZERATE wrote:

This is for the iPhone 5 series?

yes, iphone 5s....