Slic3r Progress

With a name like Jebus shouldn't you be the one telling us?  I do not think there is a way to see how long is remaining on a slice.  You can tell how it's progressing by looking at the bottom to see which part it's working on, perimeters, infill, etc.

I think that answers my question. There is no feedback at the bottom of the screen so I think it is just freezing.

It's one of those crazy dodecahedral inside out geometric figures.

Thanks.

You will need to use the 'Load gcode' button in RH to load the output from Kisslicer.  I wish RH had KS integration, but it such a minimal amount of steps and the program can do some great things.  I probably use it for at least 30% of my slicing now.

If you want to attach the STL, I can try and slice it.

Kisslicer sliced it in under a minute, but this is a pretty complicated file. I'm letting it run in slic3r (set to 3 Threads), it's going but it is probably gonna take about 10 minutes.

In slic3r config, Print Settings tab.  Select 'Advanced' on the left, and look under 'Other' to see 'Threads'.  Adjusting this value can help the speed of slicing by running another slicing thread in parallel. 

This is a complicated model, and will take a long time to slice.  Especially if you are using an older computer. Slic3r ended up giving me a 26.3mb file after 10 minutes.  I wonder if I can print this without a fan.

By fan, I mean the fan mod that puts a fan right next to the extruder to cool off the print during fine detailed printing.   This is a mod that several people have done to their Solidoodle and not standard.