1 Topic by gpatt6

  • gpatt6
  • Newbie
  • Offline
  • Registered: 2017-12-31
  • Posts: 5

Topic: How do I reset Da Vinci Mini maker tags?

Hey guys/gals

I currently own a Da Vinci Mini Maker and I have been using 3rd party filament but the three chips/tags that I have are saying that the filament is empty (when obviously its not), is there anyway to get around this or is there anyway to reset the tags? please note I use Mac and IOS and am not that tech wise (in relation to 3d printers) and I don't have access to any fancy stuff e.g ramps boards or other technology due to where I live. I have attached a photo of one of the tags.

Thanks

Post's attachments

IMG_1975.JPG
IMG_1975.JPG 1.47 mb, 1 downloads since 2018-08-14 

You don't have the permssions to download the attachments of this post.

2 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: How do I reset Da Vinci Mini maker tags?

Dude please read the forum and search for answers before you ask one of the old questions.

There are several work around for this  in the davinci section.

You can not re-flash existing tags but you can buy new tags cheap and flash whatever info you want on them with an android phone.

http://www.soliforum.com/topic/16909/xy … nfckeyxyz/


Read the stick threads in this section

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura