Topic: help with dice design
i want to design a small dice 25mmx25mmx25mm but i want the inside hollow so the dots hollow to inside.i can see no problem printing the bottom and side but when it comes to print the top how do i stop it sinking in.
- yizhou.he
- Member
- Offline
Re: help with dice design
Make the hollow inside ball shape instead of cubic.
(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
- Kronikabuse
- Member
- Offline
Re: help with dice design
hips support material
Sd4 #9080 with a glass bed. E3d chimera duel extruder. Paste extruder , duet wifi.
Lawsy carriages. linear bearings. Y axis direct drive, Kinect scanner
SD4#8188 glass bed, lawsly carriages, E3d v6, octoprint http://www.ustream.tv/channel/hotrod96z28
Filastruder/filawinder, Custom Delta 300mm x 600mm
Lawsy carriages. linear bearings. Y axis direct drive, Kinect scanner
SD4#8188 glass bed, lawsly carriages, E3d v6, octoprint http://www.ustream.tv/channel/hotrod96z28
Filastruder/filawinder, Custom Delta 300mm x 600mm
- yizhou.he
- Member
- Offline
Re: help with dice design
I assume he need to get support material out.
(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
- carl_m1968
- Member
- Offline
Re: help with dice design
yizhou.he wrote:
I assume he need to get support material out.
HIPS can be dissolved with Limonene which does not harm the other plastic. Since he wants the holes on the dice open the Limonene can get in and dissolve the HIPS then be removed as well.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
- yizhou.he
- Member
- Offline
Re: help with dice design
OK, did not see where he mentioned the holes. I will google hollow for more definition.
Also how do you selective dissolve supporting material without dual extruder?
(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
7 2018-02-01 09:02:41 (edited by scobo 2018-02-01 10:18:46)
- scobo
- Member
- Offline
Re: help with dice design
I would think 25mm would be easy enough to bridge without supports using a layer cooling fan.
Maybe print it with 4 or 5 top layers to get a nice level top surface.
Edit :
Voila !
25mm cube printed with 3 top layers, no supports.
Davinci 1.0 with repetier firmware & E3D V6 Lite
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs
- yizhou.he
- Member
- Offline
Re: help with dice design
I think rotate 45 degree and use support "touch build plate" should work, may need brim.
(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
9 2018-02-01 15:32:44 (edited by carl_m1968 2018-02-01 15:33:57)
- carl_m1968
- Member
- Offline
Re: help with dice design
yizhou.he wrote:
I think rotate 45 degree and use support "touch build plate" should work, may need brim.
If his calibration is right then three perimeters and three top/bottom layers should produce a print with no sagging. I have printed many hollow dice.
This is a simple bridging test and any printer with proper cal should be able to bridge 50mm easily.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
- yizhou.he
- Member
- Offline
Re: help with dice design
carl_m1968 wrote:
If his calibration is right then three perimeters and three top/bottom layers should produce a print with no sagging. I have printed many hollow dice.
This is a simple bridging test and any printer with proper cal should be able to bridge 50mm easily.
I think you are correct. I did not think too much about the size. I always trying avoid to design parts that depend on bridging because the concerns about the strength. However in this case, the strength of the dice is not a concern and the overall size make it unnecessary to use support.
(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
Re: help with dice design
thanks for the info, going to give it a go. will post a pic if it turns out ok..