1 Topic by Dave455

  • Dave455
  • Dave455
  • Member
  • Offline
  • Registered: 2017-12-14
  • Posts: 60

Topic: Cura versions

Hi,
I have Monoprice IIIp-D6 printers.  So far I have been using the version of Cura that came on the SD card that came with the printer.

Is there a newer version around?
I can't find a version number anywhere in the version I am using.

Dave
3D printer - Monoprice Maker Ultimate with mods-
microswiss hot end, Bondtech extruder, twin cooling fans & ducts, insulated heater block, enclosed with Lexan like the Wanhao D6 it is based on.

Dave455's Website

2 Reply by yizhou.he

  • yizhou.he
  • yizhou.he
  • Member
  • Offline
  • From: Boston, MA
  • Registered: 2017-07-05
  • Posts: 1,358

Re: Cura versions

Yes, Cura 3.1 is the lastest version of Cura. Open your current version of cura and write down settings in your printer setting. You can install Cura 3.1 without uninstall your current version of Cura that come with printer. Add new printer in Cura 3.1 and fill in data get from your old Cura and you are good to go.

(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1

3 Reply by Dave455

  • Dave455
  • Dave455
  • Member
  • Offline
  • Registered: 2017-12-14
  • Posts: 60

Re: Cura versions

Yes, the 3.1 version wants all kinds of data.  I'm not finding it in the old version.

Dave
3D printer - Monoprice Maker Ultimate with mods-
microswiss hot end, Bondtech extruder, twin cooling fans & ducts, insulated heater block, enclosed with Lexan like the Wanhao D6 it is based on.

Dave455's Website

4 Reply by yizhou.he

  • yizhou.he
  • yizhou.he
  • Member
  • Offline
  • From: Boston, MA
  • Registered: 2017-07-05
  • Posts: 1,358

Re: Cura versions

Basically only the printer setting is important, including print bed size, nozzle size, filament dimension and if you have heated bed. The rest data you can use default setting if you can not find in old setting or ask questions if you have problem with the default setting. Since you don't have to uninstall the old version, you can always go back to old version if you got problem.

(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1

5 Reply by Bennett (edited by Bennett 2018-01-18 07:14:52)

  • Bennett
  • Newbie
  • Offline
  • Registered: 2018-01-17
  • Posts: 1

Re: Cura versions

yizhou.he wrote:

Basically only the printer setting is important, including print bed size, nozzle size, filament dimension and if you have heated bed. The rest data you can use default setting if you can not find in old setting or ask questions if you have problem with the default setting. Since you don't have to uninstall the old version, you can always go back to old version if 777spiel com casinos you got problem.

That's what I thought. Thanks!