1 Topic by Reloaded256

  • Reloaded256
  • Newbie
  • Offline
  • Registered: 2016-04-04
  • Posts: 1

Topic: Sensor connector question

Hello, I have a sensor connector question. I have a Davinci 1.0a, and the xaxis wires are having connection issues.
I want to just make a new harness for the sensor.
The wires do not have the same connectors on each end.
The connector that goes to the sensor has a JST PH 2.0 mm 3 pin.
but the connector that plugs into the main board i cannot find.
Any help would greatly be appreciated.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Sensor connector question

I know they are a JST series as well, just not sure which. I swapped my board on my 1.0 so the connector was different.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.