1 Topic by exfusion (edited by exfusion 2016-04-04 05:47:41)

  • exfusion
  • Newbie
  • Offline
  • Registered: 2016-04-04
  • Posts: 1

Topic: FlashForge Dreamer uneven layers Problem on X/Y axis

Okay, I hope someone here can help. I am having a problem with uneven layers on my prints as can be seen in the picture attached. I tried changing the filament, tried cleaning the extruder, tried changing the printing speed, the X/Y travel speed and nothing works.

I have noticed that the problem starts a couple of centimeters into the print and gets worse the higher the print goes.

It is very frustrating and I need to find a solution. please, if you have any thoughts.....share them.

Post's attachments

IMG_6351.JPG
IMG_6351.JPG 807.4 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: FlashForge Dreamer uneven layers Problem on X/Y axis

Looks like a problem in your Z axis.. Is everything secure, is your bed secure can it wobble? Is your Z screw bent? If you move the bed to the bottom then watch it home does it move smooth and straight or is there back and fourth movement?

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.