1 Topic by alexkaps (edited by alexkaps 2015-11-20 15:29:09)

  • alexkaps
  • Member
  • Offline
  • Registered: 2015-02-20
  • Posts: 21

Topic: x axis offset during printing

Hello everyone,
i have a huge problem with my davinci 1.0. While printing the x axis skipping a few steps and making a loud clicking noise resulting in an offset. 
I use the stock firmware 1.0.3 and slicing with s3d. Until yesterday there was no such problem. 

I have already checked the belt tension, there are no broken parts and all axis look aligned. 
Also tried printing at a slower speed and printing different models but the problem persists.

Any help will be very much appreciated!
Thank you.

edit: uploaded this video with the offset problem in 6sec and 38sec. https://youtu.be/nJLGw6iLa5Y

http://soliforum.com/i/?FddQvYv.jpg

2 Reply by alexkaps

  • alexkaps
  • Member
  • Offline
  • Registered: 2015-02-20
  • Posts: 21

Re: x axis offset during printing

The problem seemed to be the 0030 error. The cables responsible for x axis movement had a discontinuity when flexing and i had to replace them.