You are not logged in. Please login or register.
SoliForum - 3D Printing Community → XYZ Printing DaVinci → repetier question
I flashed my 1.0A a week ago and love it. I use simplify 3D and before the flash ( I always use the usb print option) when the print was done, X and Y were going back home and the bed was going all the way down. Now when the print job is done, all axis just stop at the last print point. How can I get the original behavior back?
P.S. I don't know nothing about g-code 
Thx in advance.
check and see if the park after print job option is checked.
also what slicer are you using seems like cura parks sli3r did did not.
tin
using simplify 3D, sliccer is in it...
check and see if the park after print job option is checked.
also what slicer are you using seems like cura parks sli3r did did not.
tin
He uses simplify3d . It has a built in slicer.
Go to FFF settings, click on the Scripts tab and add these 2 lines to the Ending Script
G1 Z200
G28 X0 Y0 ;move X/Y to min endstops so the head is out of the way
That did the trick, thank you.
Check out this thread over at Voltivo, I especially like the stat and ending scripts that Luc posted in the 2nd post in that thread.
SoliForum - 3D Printing Community → XYZ Printing DaVinci → repetier question
Powered by PunBB, supported by Informer Technologies, Inc.
