You are not logged in. Please login or register.
SoliForum - 3D Printing Community → XYZ Printing DaVinci → Da Vinci 1.0a broken belt
So I had my printer for two days now, made about 8 prints with it.
When I was printing the nozzle started to move outside my printspace and it sounded wierd.
Checked the belts and than I saw that one of my belts was nearly off =/
It is marked: T132 s2m.
What does the numbers stand for?
Can I buy any belt with that numbers and it will work?
The s2m tells you it is 2mm the t132 I think is a type of timing belt it might have something to do with the total length that I don't know.
This pdf might help.
its for timing belts for cars but it might just be what you need.
http://www.timing-belts-pulleys.com/upl … 085487.pdf
Hm. So s2m is the pitch of the teeth, 132 is how long the belt is, and its 5mm wide, maby there is a place here in sweden that has it, I will check on monday. hope my warranty dont expire when I switch the belt.
Does anyone know if I can use a smaller belt?
The motor is adjustet to the lowest point (max tensioned), plus there is a tensionpart for the belt.
Hm. So s2m is the pitch of the teeth, 132 is how long the belt is, and its 5mm wide
Yep sounds right.
Misumi Has a german Office
They should have Have what you need.
http://de.misumi-ec.com/pdf/fa/2014/P1_ … s2fulltext
You could try a shorter belt but considering the photo maybe the old one just stretched. if it were me I would get a couple of the original size and maybe a couple shorter ones to try I would hate to see you buy shorter ones only to find they are too short.
Tin
Thanx alot! I will check the link out, only hope they send to private persons.
I will order a couple of shorter and two sets of original and try the shorter out, I get back here when I have test them 
The wheels that the belt is turning on, they are kind of big, 5mm is the timing belt size, but I think 6mm will fit so I will order some of them to.
Several people here have Used Misumi USA. They have a rep for quality at fair prices.
Tin
tried to register there, but got a mail back that I cant buy stuff from them, I need to have a company..
You can use your name as company name. I buy stuff from misumi all the time. Make sure it's misumi-usa
Hi I have some used daivinci parts including belts for sale
Hi - My 1.1a did the same thing - it seems that the belt used along with the tensioner (the original 1.0 DaVinci did not have this) creates too much stress and it fails. I replaced mine with one of these - just search on ebay for GT2 132. At the time, $2.39 each. These have a more sturdy fiberglass core - the original belt was (IMHO) simply too weak to do the job.
SoliForum - 3D Printing Community → XYZ Printing DaVinci → Da Vinci 1.0a broken belt
Powered by PunBB, supported by Informer Technologies, Inc.
