1 Topic by scobo (edited by scobo 2015-03-15 17:05:57)

  • scobo
  • scobo
  • Member
  • Offline
  • From: Scotland - UK
  • Registered: 2014-08-09
  • Posts: 993

Topic: Flow rate with stock firmware

Does anyone know if it's possible to alter the flow rate on stock firmware or is this dictated by the firmware ?
There's an option to change it in Cura but I'm unsure if it will have any effect with stock firmware.

Davinci 1.0 with repetier firmware & E3D V6 Lite
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Flow rate with stock firmware

scobo wrote:

Does anyone know if it's possible to alter the flow rate on stock firmware or is this dictated by the firmware ?
There's an option to change it in Cura but I'm unsure if it will have any effect with stock firmware.

Flowrate is dictated by the slicer, not the firmware.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by scobo

  • scobo
  • scobo
  • Member
  • Offline
  • From: Scotland - UK
  • Registered: 2014-08-09
  • Posts: 993

Re: Flow rate with stock firmware

Cheers Carl, another setting to play with !  smile

Davinci 1.0 with repetier firmware & E3D V6 Lite
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs