Re: Max temp help
it sounds like a bug in your host more than anything. what version of RH are you using?
Re: Max temp help
yeah thats what i thought, 1.0.6
Re: Max temp help
Ah, I'm not familiar with that version but I have heard people say it is far from perfect. If it works though, might as well not fix it 
Re: Max temp help
ok thanks anyway
30 2015-02-26 23:06:28 (edited by kwebersole 2015-02-26 23:13:58)
Re: Max temp help
Hey i keep having it stop a some random point in the print and on the log is says "mk" and i have to send "ok" then it keeps printing, it only does it on some files, any idea?
Re: Max temp help
i should also add it does it multiable times a print
32 2015-02-26 23:29:19 (edited by kwebersole 2015-02-26 23:33:35)
Re: Max temp help
i went back and looked at my firmware and the baud rate was 250000 but in RH i have it set to 115200 as Solidoodle support says, should it be like that in the firmware?
Re: Max temp help
Just bump up the baud rate in RH. the board can handle 250000 just fine.
Re: Max temp help
ok i fixed that but still stops and says "mk" and i press the "OK" button and it keeps printing then after a little it repeats
Re: Max temp help
Also after it stops you can push the extruder around, as the motors aren't "locked". Could it be that the power supply isnt big enough and caint handle the extra fan and bigger heater?
Re: Max temp help
i am also also using RH 1.0.6 and have the same issue of having to bump the X & Y endstops after homing all axis before they can be moved - not really sure what is up with that...
i think it may have something to do with the odd behavior i get if i try to add the ending G code to home X & Y after a job is completed, too...
SD4 with Lawsy carriages, Rumba board, & new 12v PSU, E3D v6, mirror bed plate, X motor fan.
Stock SD4
Prusa i3 kit, spring loaded extruder upgrade, Y axis belt tensioner
Stock SD4
Prusa i3 kit, spring loaded extruder upgrade, Y axis belt tensioner
Re: Max temp help
are you using the same version of RH, right now i am trying to fix the bigger problem of it stopping mid print
38 2015-02-27 23:20:04 (edited by madkow007 2015-02-27 23:20:40)
Re: Max temp help
madkow007 wrote:
i am also also using RH 1.0.6 and have the same issue of having to bump the X & Y endstops after homing all axis before they can be moved - not really sure what is up with that...
i think it may have something to do with the odd behavior i get if i try to add the ending G code to home X & Y after a job is completed, too...
um,yup... 
i dont have any problems with it stopping mid-print tho...
are your stepper motors overheating maybe?
most likely the X axis motor - mine used to get really hot - too hot to touch. I found a fan mount in the forums here somewhere, printed that out and put a fan on that motor and it hasnt overheated since. best thing I have done to this printer so far... aside from adjusting the trimpots that were way over spec...
SD4 with Lawsy carriages, Rumba board, & new 12v PSU, E3D v6, mirror bed plate, X motor fan.
Stock SD4
Prusa i3 kit, spring loaded extruder upgrade, Y axis belt tensioner
Stock SD4
Prusa i3 kit, spring loaded extruder upgrade, Y axis belt tensioner
Re: Max temp help
ok just checked mine and its fine, its only been doing it since i updated the firmware, i got my firmware file from Solidoodle is there a better place?
Re: Max temp help
could i use the firmware form here? https://github.com/mlaws/solidoodle2-marlin
Re: Max temp help
which printer do you have? I have the SD4 - havent done any firmware updates.
SD4 with Lawsy carriages, Rumba board, & new 12v PSU, E3D v6, mirror bed plate, X motor fan.
Stock SD4
Prusa i3 kit, spring loaded extruder upgrade, Y axis belt tensioner
Stock SD4
Prusa i3 kit, spring loaded extruder upgrade, Y axis belt tensioner
- wardjr
- Moderator
- Offline
Re: Max temp help
Use this
https://github.com/ozadr1an/Solidoodle- … in_v1_beta
Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
Re: Max temp help
Yup SD4, ok thanks will try it in the morning
Re: Max temp help
ok i tried that firmware and so far so good been printing for 3hrs now and hasnt stooped once, thanks very much! As far as the motors not moving after homing it i believe thats a RH bug as it dont do it in the older version.