1 Topic by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Topic: Da Vinci 1.0 glass dimensions

Could one or more of guys measure your bed glass. Mine has a considerable gap around it I had to shim. So I would like to see some other measurements to see if there is a variation.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

2 Reply by jamerfut

  • jamerfut
  • Member
  • Offline
  • Registered: 2015-05-06
  • Posts: 51

Re: Da Vinci 1.0 glass dimensions

Carl
Front to back measures 211 MM side to side measures 207 MM
Hope that helps

3 Reply by asho777

  • asho777
  • Newbie
  • Offline
  • From: Sydney, Australia
  • Registered: 2015-05-21
  • Posts: 9

Re: Da Vinci 1.0 glass dimensions

Mine, which is a DaVinci 1.0A is exactly 211mm square!

4 Reply by jnadke

  • jnadke
  • Member
  • Offline
  • Registered: 2015-01-24
  • Posts: 42

Re: Da Vinci 1.0 glass dimensions

I measured mine yesterday, it was almost exactly 210mm x 210mm.  Maybe 210.5

5 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Da Vinci 1.0 glass dimensions

Yeah mine are 210 by 210. Intetesting there does seem to be a slight variation.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

6 Reply by rforeman

  • rforeman
  • Member
  • Offline
  • Registered: 2014-09-16
  • Posts: 59

Re: Da Vinci 1.0 glass dimensions

Mine is 210 x 210