1 Topic by hansen644

  • hansen644
  • Member
  • Offline
  • Registered: 2014-09-10
  • Posts: 291

Topic: How to correct z home stop problem?

Hi I am using repetier host with silcer on my davinci 1.0 and after hitting the home button the z setting ends up making the bed almost touching the belt. pic attached.  Not sure what setting to change to tell the z home to go further down? any ideas?

Post's attachments

DSC00906.JPG
DSC00906.JPG 1.99 mb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: How to correct z home stop problem?

hansen644 wrote:

Hi I am using repetier host with silcer on my davinci 1.0 and after hitting the home button the z setting ends up making the bed almost touching the belt. pic attached.  Not sure what setting to change to tell the z home to go further down? any ideas?

That is the correct home setting. As long as it stops and foes not grind it is fine. When the print starts it will move down to the desired offset before the Y or X moves.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.