1 Topic by pshcims

  • pshcims
  • Member
  • Offline
  • Registered: 2015-02-27
  • Posts: 84

Topic: Replacement build plate

I am concerned that I will eventually break my glass plate. Would the replacements for the SD4 work fine with the Press? They are 8x8 whereas the Press plate is longer, but I don't think it actually needs glass at the very back.

http://www.solidoodle.com/parts/parts-S … uild-plate

2 Reply by jagowilson (edited by jagowilson 2015-05-15 01:08:42)

  • jagowilson
  • PRINTiT
  • Offline
  • Registered: 2014-09-14
  • Posts: 1,701

Re: Replacement build plate

Orrrrr go to the hardware store (any hardware store) and get some glass cut.

3 Reply by madfalcon81

  • madfalcon81
  • Member
  • Offline
  • Registered: 2014-08-05
  • Posts: 242

Re: Replacement build plate

...at an enormous 45 cents per plate smile

Fat kids are harder to kidnap!

4 Reply by TheBaron

  • TheBaron
  • TheBaron
  • Member
  • Offline
  • From: Chicago, IL
  • Registered: 2013-07-19
  • Posts: 340

Re: Replacement build plate

If you REALLY wanted to be fancy, you could get some oven glass. It's more expensive, but tougher. I have heard of one or two people accidentally pulling chips off of the cheaper plate glass when taking parts off the table.

SD3 w/ RUMBA (8825s), merlin hot end (in pieces). Ender3 w/ silent board for PLA printing. Ender5 w/ silent board, e3d v6, new z lead screw, and glass bed. DiY Kossel w/ smoothieboard (in pieces). Vellman Vertex (in pieces)
Shapeoko2 router in process of being converted to laser engraver (in pieces)
Multicam 5000 series CNC Router w/ 11HP spindle, 5x10' table, and auto tool changer (in pieces)

5 Reply by jagowilson

  • jagowilson
  • PRINTiT
  • Offline
  • Registered: 2014-09-14
  • Posts: 1,701

Re: Replacement build plate

With proper calibration and patience that doesn't happen.

6 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Replacement build plate

I have been using window glass from the local harware store since I purchased my printer, about 10 months . IIRC it cost $3.00
http://www.mcmaster.com/#glass-stock/=x7hnrp has borosilicate glass for about $25 for a 8 x 8 piece. choice of 1/8, 3/16, 1/4 for that price . Other sizes and thickness available.
I print with PLA and and use aqua net hair spray.

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura