Topic: (HELP!) X Axis Shift Problem -&- Got PLA to work on 2.0!
As you may or may not know I have installed repetier firm on the 2.0, been using it for about 4 months now and no major problems until now. I got PLA to extrude now with no problems at all! WOOHOO! Comes out amazing if not better than abs compared to detail.
I added some blue tape, took off the sides, and lowered the cooling fan for the extruder.
See my test owl in the attachments - I printed with the material Hatchbox PLA using 20% infill, 0.2mm layer height and default speeds
----------
So here's my problem, after all the fun and making little cool prints with my new filament, I used the printer the next day and here's what come out...
Now to keep in mind I left it printing longer than I should have and never killed it till it was halfway. But for all my models the X axis keeps shifting, EVERY time. To be honest I have no idea what's causing this, whether it's the board itself or the software, who knows. I cleaned the heck out of it, maintained it and re-oiled, tightened, leveled the bed, anything I could think of, but it still does it.
Does anyone have idea what's going on and how to fix this? Thanks for your time.
12 Years PC Experience
16 years old