1 Topic by L.woinson95

  • L.woinson95
  • Member
  • Offline
  • From: Burnley, Lancs, UK
  • Registered: 2015-02-07
  • Posts: 163

Topic: Extruder options

I have been searching on thingiverse and found this

thing:159159

I have tried the Airtripper with no luck and going to try one which I was emailed over but just wondering what other people would recommend

2 Reply by lachupacabra

  • lachupacabra
  • Member
  • Offline
  • Registered: 2014-08-16
  • Posts: 40

Re: Extruder options

couple of us are using the one from alex neu from voltivo: http://voltivo.com/forum/davinci-hwmods … mitstart=0

Davinci 1.0&1.0A with repetier 0.92 firmware & E3D bowden
Slicer - Simplify3d/CraftWare/MatterControl/Repetier Host
Filament - ABS, PLA, FPE, LayWood
3D modelling - Autodesk 3DS Max, Blender,

3 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Extruder options

L.woinson95 wrote:

I have been searching on thingiverse and found this

thing:159159

I have tried the Airtripper with no luck and going to try one which I was emailed over but just wondering what other people would recommend

My delta uses an all metal one I bought for 60 bucks. It was originally intended for the Da Vinci till I decided to stick with direct drive so I could do flexibles.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.