Topic: Starchaser
she is now online (for free, as usual) ...
Bust of a Space Explorer (with a bit of old school sci-fi..), traveling space for rare fallen stars...
happy downloading.. (the link is in my signature) 
1 2015-03-15 14:48:02 (edited by ysb 2015-03-15 14:50:16)
- ysb
- Member
- Offline
- wardjr
- Moderator
- Offline
Re: Starchaser
As usual... Very impressive work!
Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
- TickTock
- Member
- Offline
Re: Starchaser
Nice! What kind of filament did you use?
4 2015-03-15 18:30:31 (edited by ysb 2015-03-15 18:31:23)
- ysb
- Member
- Offline
Re: Starchaser
the black come from inventapart.com 1.75mm .. i think some standard ABS filament..
the transparent one come from creatorfuel.com ( http://www.soliforum.com/topic/10042/ju … e-awesome/ ), probably a rebranded one.. but it's a good filament
i use only ABS 1.75mm for all my models...
Re: Starchaser
YSB what program are you using?
- ysb
- Member
- Offline
Re: Starchaser
too long list but mainly zbrush and meshmixer ...