1 Topic by antimattercrusader

  • antimattercrusader
  • Newbie
  • Offline
  • Registered: 2015-02-25
  • Posts: 2

Topic: XYZ Software Crash - Immediately After Upload

I have put about 600hrs on my DaVinci thus far with minimal issues. But, now suddenly have an issue where when I click "print" it uploads to the printer, and right at 100% XZYware crashes. Pretty odd, as this seems to be more of a software/PC issue than an issue with the printer, and even with the erorr the printer goes on to print. However, I am having alot of random print failures, such as alignment shifting mid print. I am not certain if it is related, but it happened 5 times out of 6 since the software crash issues started occurring. (Although at least one of those times, the filament got bound up.)

Worth noting I am using slic3r and importing the .3W files into XZYware. I am also using a resetter.

Anyone have any thoughts? I've tried:
- Restarting PC/Printer
- New USB cable
- Clean install of several verisons of XYZWare, all have the same issue
- Running as Admin
- Running in Comparability Mode (Unable to find printer)


>.<

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: XYZ Software Crash - Immediately After Upload

antimattercrusader wrote:

I have put about 600hrs on my DaVinci thus far with minimal issues. But, now suddenly have an issue where when I click "print" it uploads to the printer, and right at 100% XZYware crashes. Pretty odd, as this seems to be more of a software/PC issue than an issue with the printer, and even with the erorr the printer goes on to print. However, I am having alot of random print failures, such as alignment shifting mid print. I am not certain if it is related, but it happened 5 times out of 6 since the software crash issues started occurring. (Although at least one of those times, the filament got bound up.)

Worth noting I am using slic3r and importing the .3W files into XZYware. I am also using a resetter.

Anyone have any thoughts? I've tried:
- Restarting PC/Printer
- New USB cable
- Clean install of several verisons of XYZWare, all have the same issue
- Running as Admin
- Running in Comparability Mode (Unable to find printer)


>.<


Make sure your file name is under 16 characters.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by waleedijaz333

  • waleedijaz333
  • Newbie
  • Offline
  • Registered: 2015-03-02
  • Posts: 1

Re: XYZ Software Crash - Immediately After Upload

Worth noting I am using slic3r and importing the .3W files into XZYware. I am also using a resetter.

We are the leading the world in providing best Testking itil foundation v3 dumps  prep solutions. Our incredible offers for and Testking cissp course gedare accessible at reasonable prices;