You are not logged in. Please login or register.
SoliForum - 3D Printing Community → XYZ Printing DaVinci → Removing top solids.
I own the XYZ 1.0 AiO. I was trying to print out a vase. I set the density to hollow (0%) and press print. However, after the scan the top layer is still there. The insides of the vase is hollow but there is a layer covering the top part of it. Is there a way to remove the top solids from the print. If so, where can I find this option in the program? Thanks
I own the XYZ 1.0 AiO. I was trying to print out a vase. I set the density to hollow (0%) and press print. However, after the scan the top layer is still there. The insides of the vase is hollow but there is a layer covering the top part of it. Is there a way to remove the top solids from the print. If so, where can I find this option in the program? Thanks
it is my understanding that the scanning feature is not meant to just scan and print. You then have to open the file and further edit it. Such as in your case make the top hollow. The scanner cannot tell what is hollow or solid if it see a dark area it just assumes a solid. You have to edit the opening in by hand. There is supposed to be an editing software package included that is used to clean up a scan and do what you want to do.
You also double posted, please delete the other thread. We only need one.
Aorbit wrote:I own the XYZ 1.0 AiO. I was trying to print out a vase. I set the density to hollow (0%) and press print. However, after the scan the top layer is still there. The insides of the vase is hollow but there is a layer covering the top part of it. Is there a way to remove the top solids from the print. If so, where can I find this option in the program? Thanks
it is my understanding that the scanning feature is not meant to just scan and print. You then have to open the file and further edit it. Such as in your case make the top hollow. The scanner cannot tell what is hollow or solid if it see a dark area it just assumes a solid. You have to edit the opening in by hand. There is supposed to be an editing software package included that is used to clean up a scan and do what you want to do.
You also double posted, please delete the other thread. We only need one.
I think by "scanning" he really means slicing.
I don't know which software you are using, but in slic3r you have to set top solid layers to 0 to have a model printed without top layers.
That was my bad, i meant to type slicing. I'm using the xyzware right now. will slic3r work with the printer?
It won't work with "stock" xyzware, but you can try the moded version over from voltivo: http://voltivo.com/forum/davinci-softwa … e-open-mod
Or you can flash your printer with repetier and use repetier host to control the printer. Numerous tread are about that.
SoliForum - 3D Printing Community → XYZ Printing DaVinci → Removing top solids.
Powered by PunBB, supported by Informer Technologies, Inc.
