Solidoodle Workbench Apprentice start gcode

There are plenty of threads that cover start and end G-code (use the search function). I would start here http://www.soliforum.com/topic/231/impr … end-gcode/

If you want to use the auto-level you will probably need to add in a G28 & G29 somewhere.

Here is the start code that I have come up with by cobbling together other start-up codes. Mostly cpsmichel's and lawsy's.

G21; set mm units
G1 Z10 F300; drop bed for clearance
G28 X0 Y0; home x and y axis
@pause; probe double check
G28 Z0; home z
M190 S80; set bed temp to start heating
M104 S215; set extruder to start heating
M190 S105; set bed temp to printing temp
G90; set absolute coordinates
G1 Z5 F300; move bed down 5mm
G1 X10 Y10 F3000; move to front left corner
M109 S215; wait for extruder temp to be reached
G28; home prior to z-probe
G29; z-probe
G1 Z.35 F200; move platform close to nezzle
G92 E0; reset extrusion distance
G28; home to drop anchor
G1 E7; extrude anchor

I have tweaked a few things that I have yet to try, like the "pause" at the beginning for z-probe and the "home" before extruding the anchor. The anchor kept ending up in the center of the glass and was gumming up the works. But, I was able to hit the "RUN" button and the printer did everything I thought it would in the start-up code. I will add these last few changes on my next print.

Let me know if any of this is redundant or bulky!

Thanks for your help!!!

Nick