1 Topic by owenransen

  • owenransen
  • Member
  • Offline
  • From: Milano, Italy
  • Registered: 2012-10-29
  • Posts: 87

Topic: Loose wires at print head, Issue 0011

Getting help out of XYZPrinting is like getting blood out of a stone. So, dear Friends...

The extruder temperature did not rise while I was attempting to change the cartridge. I got an Issue 11 error message on the main panel. Looking in google I found this:

http://www.elproducts.com/chucks-blog/d … r-warranty

So I checked the voltages, they seemed ok, and when I tried again the machine started working again.

So, see the attached photo, I think that those wires are loose. How to fix them better?

Post's attachments

How-to-fix-wires.jpg
How-to-fix-wires.jpg 111.79 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.
Author of  PhotoToMesh, for making bas-reliefs and
lithophanes from your photos and images
http://www.ransen.com/PhotoToMesh

owenransen's Website

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Loose wires at print head, Issue 0011

owenransen wrote:

Getting help out of XYZPrinting is like getting blood out of a stone. So, dear Friends...

The extruder temperature did not rise while I was attempting to change the cartridge. I got an Issue 11 error message on the main panel. Looking in google I found this:

http://www.elproducts.com/chucks-blog/d … r-warranty

So I checked the voltages, they seemed ok, and when I tried again the machine started working again.

So, see the attached photo, I think that those wires are loose. How to fix them better?


See here..

http://www.youtube.com/watch?v=xyn6TOsemqI

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by owenransen

  • owenransen
  • Member
  • Offline
  • From: Milano, Italy
  • Registered: 2012-10-29
  • Posts: 87

Re: Loose wires at print head, Issue 0011

carl_m1968 wrote:

See here..

http://www.youtube.com/watch?v=xyn6TOsemqI

Magic! Many thanks. At the moment that feels like the most useful video on YouTube ever...!

Author of  PhotoToMesh, for making bas-reliefs and
lithophanes from your photos and images
http://www.ransen.com/PhotoToMesh

owenransen's Website