1 Topic by Rocketman

  • Rocketman
  • Member
  • Offline
  • Registered: 2013-02-02
  • Posts: 568

Topic: Brinno Timelapse Camera - Like New (Possibly for 3D printing videos)

This is a 1.8MP camera that has timelapse software right in it and can take a photo once a second or once a day and can go as long as 3 months if pictures are stretched out enough. It runs on 4 AA batteries which I will include the ones currently in it. It compiles the video from the photos directly into .AVI format and can be transfered to computer via its SD card. It can take pictures with or without time code. I used it primarily for 3D printing videos and outdoor videos. I have since got a intervalometer for my Canon camera and don't need this anymore. It cost around $100 new but I'll sell it for $50 and a reasonable shipping cost. Any questions just ask. I reduced the attached video file quite a bit to fit. It came out to about 372MB for 55 second in original format.

Post's attachments

ShortVideo.mp4 1.86 mb, 14 downloads since 2015-02-05 

You don't have the permssions to download the attachments of this post.

2 Reply by Rocketman

  • Rocketman
  • Member
  • Offline
  • Registered: 2013-02-02
  • Posts: 568

Re: Brinno Timelapse Camera - Like New (Possibly for 3D printing videos)

As a side note the menu options are a little tricky in it, but not impossible. lol.

3 Reply by Rocketman

  • Rocketman
  • Member
  • Offline
  • Registered: 2013-02-02
  • Posts: 568

Re: Brinno Timelapse Camera - Like New (Possibly for 3D printing videos)

Any interest?