1 Topic by aldarondo

  • aldarondo
  • Newbie
  • Offline
  • Registered: 2013-07-03
  • Posts: 7

Topic: 3 Printers & 1 Filastruder

I've spent almost 2 years into 3D printing and the equipment breaks have caused me to give up. Now I just want these printers out of the house so I don't have to see them. Reasonable offers will be accepted.

- Solidoodle 3 with a fried motherboard

- CTC dual extruder printer, last time I ran it the heating element started glowing and I'm not up for figuring out what is wrong with it.

- Prusa 3D printer purchased from MakerFarm back in 1/2013, assembled and had it run a bit but not well

- Filastruder serial #009, I never got it working right, even purchased a new stronger motor for it but never got much further

If interested in them, I'll send photos. Being sold as-is.

2 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: 3 Printers & 1 Filastruder

I would love to see some photos and some kind of price range.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

3 Reply by AZERATE

  • AZERATE
  • AZERATE
  • PRINTiT
  • Offline
  • From: Chicago
  • Registered: 2013-11-28
  • Posts: 2,077

Re: 3 Printers & 1 Filastruder

wardjr wrote:

I would love to see some photos and some kind of price range.

+1
I may be interested in the SD3

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!

4 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: 3 Printers & 1 Filastruder

AZERATE wrote:
wardjr wrote:

I would love to see some photos and some kind of price range.

+1
I may be interested in the SD3

With out pictures I would offer $450 for all of it as shipping is going to most likely be rather expensive!

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

5 Reply by Ggalisky

  • Ggalisky
  • Ggalisky
  • Member
  • Offline
  • From: California
  • Registered: 2014-05-21
  • Posts: 487

Re: 3 Printers & 1 Filastruder

I would be very interested. Pictures?

Ulitmaker 2, a few repraps, Custom Big FFF 3D printer with heated chamber.

My Blog http://ggalisky.weebly.com/
My Youtube https://www.youtube.com/channel/UCXShYo … aDUpebDAOw

6 Reply by shields1.as

  • shields1.as
  • Member
  • Offline
  • Registered: 2014-09-02
  • Posts: 398

Re: 3 Printers & 1 Filastruder

I'd like to buy the filastruder and prussa

7 Reply by aldarondo

  • aldarondo
  • Newbie
  • Offline
  • Registered: 2013-07-03
  • Posts: 7

Re: 3 Printers & 1 Filastruder

I'm getting photos of the filastruder, attached are two of the printers.

To see my sales reputation, go on ebay and look for aldarondo (seller since 1997) or rondo-enterprises (since 2013).

Post's attachments

CTC1.JPG
CTC1.JPG 1.3 mb, file has never been downloaded. 

CTC2.JPG
CTC2.JPG 1.15 mb, file has never been downloaded. 

maker1.JPG 2.16 mb, file has never been downloaded. 

maker2.JPG
maker2.JPG 2.26 mb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

8 Reply by aldarondo

  • aldarondo
  • Newbie
  • Offline
  • Registered: 2013-07-03
  • Posts: 7

Re: 3 Printers & 1 Filastruder

Here is the solidoodle 3

Post's attachments

solidoodle3a.JPG
solidoodle3a.JPG 2 mb, file has never been downloaded. 

solidoodle3b.JPG 1.37 mb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

9 Reply by aldarondo

  • aldarondo
  • Newbie
  • Offline
  • Registered: 2013-07-03
  • Posts: 7

Re: 3 Printers & 1 Filastruder

On price, I'm uncertain as they're all going to need some work done on them. On shipping, my work has a holiday shipping discount for employees starting next week that I'll be using with FedEx so consider price as including shipping within the 50 US states.

10 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: 3 Printers & 1 Filastruder

If you are paying the shipping I will offer you $500 for all of it.  Seems as though there is a lot of fixing to be done and I haven't seen the filastruder yet.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

11 Reply by Ggalisky

  • Ggalisky
  • Ggalisky
  • Member
  • Offline
  • From: California
  • Registered: 2014-05-21
  • Posts: 487

Re: 3 Printers & 1 Filastruder

$150 for the SD3 and filastruder, I will pay shipping. Are you in California? If so I can pick it up local.

Ulitmaker 2, a few repraps, Custom Big FFF 3D printer with heated chamber.

My Blog http://ggalisky.weebly.com/
My Youtube https://www.youtube.com/channel/UCXShYo … aDUpebDAOw

12 Reply by aldarondo

  • aldarondo
  • Newbie
  • Offline
  • Registered: 2013-07-03
  • Posts: 7

Re: 3 Printers & 1 Filastruder

I did some thinking, I'm going to donate to a makerspace nearby instead with the 100 lbs of shipping involved in all 4. I'm in the Phoenix area.

13 Reply by shields1.as

  • shields1.as
  • Member
  • Offline
  • Registered: 2014-09-02
  • Posts: 398

Re: 3 Printers & 1 Filastruder

I'll buy it all if you'd like to remind your decision.

14 Reply by Snickers

  • Snickers
  • Member
  • Offline
  • Registered: 2013-10-15
  • Posts: 31

Re: 3 Printers & 1 Filastruder

Im interested in the prusa