1 Topic by Ski52

  • Ski52
  • Ski52
  • Member
  • Offline
  • From: Florida USA
  • Registered: 2013-10-23
  • Posts: 332

Topic: How do I print this?

SD2, upgraded to Pro, Heated bed, glass, hairspray.
I have tried almost every position to print this piece.  I really don't know how to use the support functions.  I tried the default support, and ended up with a rather large block of PLA that I couldn't separate from the actual print. 
Using Repetier V0.85b, & Slic3r V 1.01
Can someone show me the appropriate 'support' settings to use?  As I said, I'm currently using the defaults.  Since Christmas, my prints have gotten noticeably better, but I am stumped here.

Any help greatly appreciated!

Thanx

Ski

Hope the file comes thru -  Trying to print reims6a.stl

Post's attachments

reims6a.STL 26.06 kb, 28 downloads since 2014-06-04 

You don't have the permssions to download the attachments of this post.
Ender 3 Pro

2 Reply by pirvan (edited by pirvan 2014-06-05 14:21:00)

  • pirvan
  • pirvan
  • Member
  • Offline
  • From: San Francisco
  • Registered: 2013-03-27
  • Posts: 1,797

Re: How do I print this?

Many people struggle to print objects whole, when it's not necessary.  You just have to get creative with how you can deconstruct your objects, so you can print them in pieces that are easy to print, then all you need to do is glue the pieces together.

Usually that works well with ABS, but no so well with PLA. With PLA you can use Epoxy or CA, but acetone doesn't work with it.

Here is your model cut into two pieces tat don't require any support and will print perfectly.  All you need to do is glue the pieces together.

Post's attachments

reims6a (Cut 1).stl 7.8 kb, 14 downloads since 2014-06-05 

reims6a (Cut 2).stl 25.67 kb, 17 downloads since 2014-06-05 

You don't have the permssions to download the attachments of this post.
To print or, 3D print, that is the question...
SD3 printer w/too many mods,  Printrbot Simple Maker Ed.,  FormLabs Form 1+
AnyCubic Photon, Shining 3D EinScan-S & Atlas 3D scanners...
...and too much time on my hands.

3 Reply by Ski52

  • Ski52
  • Ski52
  • Member
  • Offline
  • From: Florida USA
  • Registered: 2013-10-23
  • Posts: 332

Re: How do I print this?

I will try that.  Never thought of splitting it into two parts.  Gotta learn to play with the G-code. 

Thanx for the help!

Ender 3 Pro

4 Reply by pirvan (edited by pirvan 2014-06-05 14:21:47)

  • pirvan
  • pirvan
  • Member
  • Offline
  • From: San Francisco
  • Registered: 2013-03-27
  • Posts: 1,797

Re: How do I print this?

It's not the GCode.  It's learning to use a program that can manipulate the STL model.  Something like NetFabb or MeshLab

To print or, 3D print, that is the question...
SD3 printer w/too many mods,  Printrbot Simple Maker Ed.,  FormLabs Form 1+
AnyCubic Photon, Shining 3D EinScan-S & Atlas 3D scanners...
...and too much time on my hands.