1 Topic by diveinstructorbill58

  • diveinstructorbill58
  • Newbie
  • Offline
  • Registered: 2014-02-22
  • Posts: 1

Topic: Introduction

Hi All       Bill D here new to 3 D printing  I am  full of questions

2 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: Introduction

Welcome Bill,
Ask away there are a lot of people here that are extremely knowledgable.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

3 Reply by AZERATE

  • AZERATE
  • AZERATE
  • PRINTiT
  • Offline
  • From: Chicago
  • Registered: 2013-11-28
  • Posts: 2,077

Re: Introduction

Greetings, Bill! You have come to the right place. 1 year ago I knew near nothing about 3D printing. But after coming here daily, I have learned enough to design, upgrade, and print.
And I learn something new everyday! smile

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!