1 Topic by ggunners (edited by ggunners 2014-01-28 00:21:08)

  • ggunners
  • ggunners
  • Member
  • Offline
  • From: Chantilly, VA USA
  • Registered: 2013-12-03
  • Posts: 170

Topic: Tilted Buddha and Stinkekroete2

Tilted Budda: http://www.thingiverse.com/thing:226931
Stinkekroete2: http://www.thingiverse.com/thing:227512

The Buddha prints very nice, this one is at 200 micron height, a little rough around the teeth.
http://www.soliforum.com/misc.php?action=pun_attachment&item=4487&download=0

The Stinker is quite a challenge. The .stl file is very detailed at 12M download but is very small when opened in Repetier. This one is printed at 30 times actual and 200 micron height. With the extra detail of the little nibs on the skin, I may try this one at 100 microns to see if they will show up better. The toes can break apart easily. My little girls like this one.
http://www.soliforum.com/misc.php?action=pun_attachment&item=4488&download=0
http://www.soliforum.com/misc.php?action=pun_attachment&item=4489&download=0

-- ggunners

Post's attachments

20140125_213433.jpg 66.77 kb, file has never been downloaded. 

20140127_133000.jpg
20140127_133000.jpg 39.9 kb, file has never been downloaded. 

20140127_133135.jpg 47.75 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.
SD2 Expert stock, ABS fume fan,
XYZ DaVinci 1.0 stock ABS, Simplify3D
QUBD Two-Up PLA, new 3D printed X gantry, Y idler, flex z coupler, extruder mount, E3D Lite